You are Here:
Rugged Surge. 762 Suppressor

Author (Read 955 times)

Rugged Surge. 762 Suppressor
« on: February 04, 2016, 08:45:35 AM »
 

Rangerwalker71

  • Plinker
  • **
  • 53
    Posts
  • Karma: 0
  • FNG
Great Review on the Rugged Surge 762 Suppressor.
https://www.youtube.com/watch?v=HXHq9Kkj0aU


Surge 762 with Adapt™ Modular Technology

SPECIFICATIONS

CALIBER: 7.62mm rated to .300 RUM; Belt Fed Rated™
DIAMETER: 1.5”
LENGTH:  9” to 7.5″
WEIGHT: 21.5 oz to 17.5 oz
SOUND LEVEL: (SPL) 134-138.4 Db
FINISH: Cerakote
MATERIALS:

Baffles: Stellite™ core
Tube: 316L Stainless Steel
Mount: 17-4 PH Stainless Steel
FEATURES

ADAPT™ Modular Technology
Interchangeable Front Caps 7.62mm (5.56mm available)
Monolithic 17-4 PH Stainless Steel Mount
Quick Detach Dual Taper Locking System™
Unconditional Lifetime Warranty


One can. Two lengths.

Introducing the Surge 762™—a suppressor on your own terms. Now you don’t have to choose between a short suppressor and a long one. You don’t have to buy two. You don’t have to pay a tax stamp twice. Or smudge your fingerprints twice. Or wait 6 to 8 months (at best) twice.

With the Surge 762, you get two lengths with one innovative suppressor. It’s your choice.
ADAPT™ Modular Technology. Stop choosing and start adapting.

The Surge 762 features ADAPT™ Modular Technology that lets you change sizes with ease—so you can jump from a bolt-action to SBR in seconds. It’s the lightest 762 suppressor in its class by two ounces, and it’s tough as nails.
Accuracy comes standard.

Surge 762 features a patent pending quick detach Dual Taper Locking System™ that ensures wobble free firing. Constant spring pressure on the rear taper keeps the mount securely locked against the front taper regardless of metal expansion associated with repeated heating and cooling cycles. When it’s attached to the muzzle device or flash hider (included with every Surge 762), your rifle and Surge 762 become one.
The most innovative, strategically produced suppressor you’ll ever shoot.

It starts with a single 2.8 lb piece of hardened 17-4PH stainless steel. We machine the 17-4 into the Surge 762’s mount and expansion chamber. This provides an unmatched strength-to-weight ratio, while minimizing the distortion normally associated with heat treat and welding processes. Its baffles are made from Stellite™ for peak heat and abrasion resistance. And finally, we strategically place the engraving over the thickest cross section of the tube for fast and easy replacement should the suppressor become damaged beyond repair.
Introducing our Unconditional Lifetime Warranty.

If something happens to your Surge 762—say you drop it from a mountaintop—we’ll fix it or replace it free of charge. Look all over this website and you’ll see no small legal type.

SBR's, AI's and Suppressors. The only way to fly.
COLONIALARMORY.COM ONLY PLACE TO SHOP.
 

Re: Rugged Surge. 762 Suppressor
« Reply #1 on: March 25, 2016, 11:12:09 AM »
 

Minnesotamulisha

  • Target Painter
  • *
  • 20
    Posts
  • Karma: 0
Just received mine on Tuesday and hit the range Wednesday.  This is my first can and I love the $#!+ out of it!  There was a good storm coming in while I was shooting so I felt rushed, not to mention I was giddy like a damn school girl. 

A few groups were impressive, others not so much.  I'm sure the group size was more operator error than it was anything else, especially since two of the groups were tighter than I had shot in this rifle prior to using the can.  Next time I'll take a few more deep breaths before I touch one off. 

I didn't shoot with the can at 7.5, only 9 inches and damn do I appreciate the lack of noise.  To hear the bullet hit the plastic target backer was impressive.